Whole-Home Fixture Planner
For homeowners, builders and interior designers

Size every light in the house before you buy

Enter each room once. Get the fixture size, count, spacing and hang height, drawn to scale. Then compare good, better and best fixtures at public prices, room by room, with a source for every rule.

Elevation, to scale

Fixture option to draw
Point at or tab to a fixture to read its size and height.
Whole home

Floor plan with fixtures

A simple layout of your room list, to scale, with each fixture placed. It does not show your real floor plan. Select a room to open it above.

Fixture schedule

Every fixture, three price levels

Before you buy

Questions and answers

Short answers for homeowners, builders and interior designers. Each rule or number from an outside source links to that source.

What size chandelier do I need?

Add the room length and width in feet, and read the sum as the width in inches (Kichler chandelier tips). For example, a 12 by 14 ft room gives a 26 in chandelier. Kichler calls this the minimum width. Over a dining table, make a round chandelier one-half to two-thirds of the table width (Golden Lighting sizing guide). Golden Lighting says to trust the table rule when the two rules do not agree. Make a linear chandelier one-third to one-half of the table length (Kichler chandelier tips).

How high should a chandelier hang over a dining table?

Hang the bottom of the chandelier 30 to 36 in above the tabletop (Golden Lighting sizing guide). Kichler starts at 30 in and adds 3 to 6 in for wider tables or taller ceilings (Kichler chandelier tips). Where people walk under a fixture, keep its bottom at least 7 ft above the floor (Golden Lighting sizing guide). The planner shows an alert when a hanging fixture cannot keep that clearance.

How high and how far apart should pendants hang over an island?

Hang the bottom of each pendant 30 to 36 in above the counter (Kichler kitchen tips). Make each pendant about one-third of the island width (Golden Lighting island guide). Kichler says to keep each end pendant 6 in or more from the end of the island. It also says to leave 12 to 24 in between the widest points of mini pendants. Kichler adds that pendants generally look best in odd numbers (Kichler pendant guide). The planner works out the count and the spacing for your island.

Where do bathroom sconces and vanity lights go?

Center side sconces 60 to 66 in above the finished floor (Golden Lighting sconce guide). Keep each sconce 2 to 6 in from the mirror edge, with about 24 to 36 in between a pair. The planner draws side sconces at 60 in. For a light bar over the mirror, sources differ. Kichler centers the bar 72 in above the floor and never above 80 in (Kichler bath tips). Golden Lighting mounts it 78 to 84 in above the floor, with at least 6 in to the ceiling (Golden Lighting vanity guide). The planner draws the bar at 79 in, where the two ranges overlap. Kichler calls a 24 in or 3-light bar the usual minimum.

Which color temperature and CRI should I choose?

For homes, a DOE buying guide lists 2,700 K (warm) and 3,000 K (soft). It lists 4,100 K (cool) for offices and classrooms (DOE light bulb guide). Use the same color temperature in each room. DOE notes that a large change, such as from 2,700 K to 4,100 K, is easy to see and can leave people unhappy. For color rendering, a DOE fact sheet describes a CRI in the 80s as good and a CRI in the 90s as excellent (DOE color fact sheet). The same fact sheet notes that the red score, R9, matters for skin tones.

Do I need a damp-rated or wet-rated fixture?

It depends on where the fixture goes. For fans, ENERGY STAR advises a damp rating in bathrooms and other humid areas (ENERGY STAR fan basics). It advises a wet rating where water can reach the fan, such as on a patio or porch. The planner picks a damp or wet fan under a roof, and a wet fan where rain can reach it. The 2021 International Residential Code is a model code for homes. Near a tub or shower, it sets a zone 3 ft out and 8 ft up from the tub rim or shower threshold. Plug-in fixtures, hanging fixtures on a cord, chain or cable, pendants, track lights and ceiling fans must stay out of that zone (IRC Section E4003.11). A fixture over the tub or shower, up to 8 ft above the rim or threshold, must be marked for damp locations. Where shower spray can reach it, it must be marked for wet locations. Your local code can differ, so ask your electrician. The planner does not check ratings on indoor fixtures.

Will my LED fixtures work with my dimmer?

Not always. Some LED products dim as smoothly as incandescent lamps. Others dim unevenly, stop at a high level, or do not dim at all (DOE dimming report). DOE advises you to make sure that LEDs are compatible with the dimming system (DOE light bulb guide). Use a fixture and dimmer pair that the fixture maker or the dimmer maker recommends, or ideally both (DOE dimming report). Even a compatible pair can flicker, dim unevenly, or stop at a high level. When you can, test the fixtures and the dimmer over the full dimming range. The planner does not check dimmers.

How long does it take to get fixtures?

It depends on the item and the day. On November 7, 2026, most retailer pages in our list showed stock or a ship time of 1 to 10 business days. Some showed a backorder or a ship date months later. The planner marks a pick with a lead-time chip when its page states a ship or backorder date 14 days or more after that day. See the chips in the fixture schedule. Check stock before you order, and order the long-lead items first.

Method

How we size each fixture

Each rule comes from a public lighting or fan guide. When sources differ, we show the full range and draw the part where they agree. A lighting designer can change any of them for your home.

Next step

Send to a lighting pro

Copy this project brief and paste it into your own email or message. This page does not send anything.


        

Who reviews it

I am a

A Lighting Certified (LC) designer reviews South Florida projects (Palm Beach, Broward and Miami-Dade). A partner reviews projects in other areas.

We use the ZIP code only to show who reviews the brief. It stays on this page.

Owner notes

These notes are for the site owner. The footer link and the #owner address open them. Customers do not need them.

Data

  • Built 2026-11-07. Not deployed. No repo yet; run the repo-setup skill before any deploy.
  • 61 fixtures and fans from 10 makers: Fanimation, Generation Lighting, Hinkley, Hudson Valley Lighting, Kichler, Minka Aire, Modern Forms, Progress Lighting, Visual Comfort & Co., WAC Lighting.
  • Prices: the public price on the product page on 2026-11-07. Visual Comfort & Co. shows a sale price and a list price for its Studio, Generation Lighting and fan lines; the page uses the sale price and shows the list price. Destination Lighting shows one price.
  • One recessed option (WAC FQ 4 in) adds two public prices: the trim and the matching housing.
  • 23 sizing rules from 20 public guide pages. Files: data/rules.json, data/products.json, data/example-home.json.
  • Research scripts: tools/research (make_products.py rebuilds products.json from the saved pages).

Sources for the sizing rules

Sources for the fixtures (price and date seen)

Lead-time warnings

The page shows a lead-time chip only when the product page states a ship date or backorder date 14 days or more after 2026-11-07. These 9 products have one: Gill globe pendant, aged brass (2027-03-06); Darlana 30 in wrapped chandelier (Chapman & Myers) (2027-03-25); Talia medium chandelier (Julie Neill) (2027-01-23); Madden pendant, brushed nickel (2026-12-10); Darlana large lantern (Chapman & Myers) (2026-12-10); Halstead four-light vanity light, chrome (2026-12-13); Barton large bath sconce (Ralph Lauren) (2027-02-14); Padgett wall lantern, black (2027-01-20); Darlana large bracket lantern (Chapman & Myers) (2027-02-14). Other pages state a ship time of 1 to 10 business days.

Our assumptions

  • Our assumption: counter height 36 in, table height 30 in, vanity 34 in, mirror drawn 32 in tall from 40 in. These set drawings and hang heights above the floor.
  • Our assumption: where a source gives one number (door lantern one-quarter or one-third of the door height), a fixture within 15 percent of that number fits.
  • Our assumption: a room rule that gives only a minimum width (length plus width) accepts up to the 4 ft wall-clearance limit (Lamps Plus). Where that limit is smaller than the minimum (narrow stair halls), we accept up to 15 percent over the minimum.
  • Our assumption: in a two-story foyer we draw the fixture centered at half the ceiling height, as a stand-in for the Kichler advice to center it in the upper window.
  • Our assumption: over a stair, the fixture hangs over the middle of a straight run. The step below it is at half the floor-to-floor height. We measure the 7 ft clearance and the 2 to 3 in per foot rule from that step.
  • Our assumption: one fan for each 400 sq ft, because the ENERGY STAR table stops at 400 sq ft. Lamps Plus says 60 in or larger above 350 sq ft; we cap that at 72 in.
  • Our assumption: the fan blades sit 10 in below the downrod. For ceilings over 15 ft we read the downrod from a straight line between the two ENERGY STAR points (6 in at 9 ft, 120 in at 20 ft). We use the low end of each Lamps Plus downrod range.
  • Our assumption: we read 66 in above the threshold as the center of the door lantern. We draw lanterns 8 in from the door edge.
  • Our assumption: sconce width of 5 in for spacing math. We move sconces from 4 in down to 2 in from the mirror edge to stay inside 36 in apart.
  • Our assumption: at least 6 in of chain and canopy above any hanging fixture. Pendant count: the lowest odd count in the Lamps Plus range of one per 2 to 3 ft, else the lowest count.
  • Our assumption: Good is the lowest price that fits, Best is the highest, Better is the fit closest to the middle price. If fewer than three fit, the nearest sizes fill in and show a size chip.

Engine limits

  • No light-level math. The planner sizes and places fixtures; it does not compute footcandles. Recessed counts follow the Kichler spacing rule only.
  • Rooms are rectangles. Sloped ceilings, beams, soffits, curved stairs and stair landings are not modeled.
  • The floor plan packs rooms in rows in list order. It is not the real plan of the house.
  • One finish per product. Other finishes and sizes in a family can cost more or ship later.
  • Prices and stock change daily. Lead-time notes are from one day. Bulbs, downrods, controls and labor are not in the totals.
  • No wet or damp check on interior fixtures. Fan listings come from the product page; outdoor lanterns are all wet or damp listed on their pages.

Routing plan

  • ZIP codes 33000 to 33499 (Palm Beach, Broward and Miami-Dade) put the LC designer line in bold. Other ZIPs put the partner line in bold. No partner is signed yet.
  • The send step is copy only. There is no form, no backend and no email address on the page.
  • Money: no affiliate or referral tags now. Later, affiliate links on retailer pages (the report lists YLighting 5 to 10 percent and Lumens 6 to 10 percent; confirm in the network). High-end South Florida homes route to the LC designer.

Name

Whole-Home Fixture Planner is a working name. It was not checked; run the ht-name-check skill before any launch.

Ask a lighting designer about this project

Send your plan to Holzer Lighting in Boca Raton, Florida. Holzer Lighting designs, specifies and buys lighting for owners, managers, designers and builders.

A designer reads your brief and contacts you. The designer checks the rules, the light levels and the prices for your site. This page gives planning estimates only.

You can also email info@holzerlighting.com or call 561.508.8990.

About Holzer Lighting

Other free lighting tools:

Holzer Lighting gets your details and the project brief from this page. They use them only to answer you.