Solar Streetlight Sizer

Light the streets before the grid power is in

Size solar streetlights for a street, path, parking area or entry. Get the pole spacing, the light, the panel and the battery, a check for every month, and a cost comparison with grid poles and trenching.

Example: 2,400 ft of residential street near Orlando, Florida. Change any input.

Use
Size
Target light level
20 ft
Nights of backup
Nights the battery runs the light with no sun at all.

Your street at dusk

Light on the ground

Point at the map to read the light level
Footcandles

Energy check, month by month

The panel must refill the battery every day of the year. Long winter nights need the most energy. Cloudy seasons give the least sun. The worst month sets the size.

Solar energy in, per dayEnergy needed, per night
NightRun on batteryBattery charge

Cost: solar compared with grid poles and trenching

Both options need the same poles and bases. Solar adds a solar light kit at each pole. Grid power adds a trench or bore, wire, pull boxes, a power service and a power bill. Estimate

Real products near this size

We check each product with its own panel, battery and light at your place, use and dimming profile. Numbers come from the maker's spec sheet. Prices show only where the maker posts a public price.

Questions and answers

Short answers to common questions. Each answer links to its source.

How do you size a solar streetlight?

Size it in four steps. First, find the light level and the pole spacing that the site needs. Second, find the energy the light uses each night. Third, size the panel to refill the battery in the worst month. Fourth, size the battery for the backup nights you want. Winter has the longest nights, and cloudy seasons give the least sun, so the worst month depends on the place and the use. This planner gets the sun for each month from PVWatts, a tool from a U.S. Department of Energy national laboratory. It gets the night length from the NOAA sunrise and sunset equations.

How many nights of backup does a solar streetlight need?

Backup nights are the nights the battery can run the light with no sun at all. Makers offer different amounts. A Solar Illuminations data sheet states a minimum of three to five days of battery backup. A Solar Lighting International data sheet offers a 3-day or a 5-day battery. This planner lets you pick 3, 4 or 5 nights. More backup needs a larger battery. A dimming profile lowers the energy each night, so the same battery lasts more nights.

How long do solar streetlight batteries last?

It depends on the battery type, the heat and how deeply the battery discharges each night. A Solar Illuminations data sheet gives a typical life of about 5 to 7 years for its gel and AGM lead-acid batteries. The same sheet says repeated deep discharge shortens lead-acid battery life. A Sol data sheet gives an average life of 12 years for its NiMH battery in tropical zones. Sol covers the whole system, including the battery, for 10 years. This planner uses 80% of the capacity of a LiFePO4 battery and 50% of a lead-acid battery. Budget for a battery change during the life of the light.

Can solar streetlights stand up to hurricane winds?

A panel on top of a pole catches wind. In Florida, the Florida Building Code, Sec. 1609.3, sets the design wind speed from its wind maps. Maker ratings differ. A Greenshine data sheet rates its panel mount to 145 mph, with 185 mph as an option. A Solar Lighting International data sheet offers wind ratings from 100 to 170 mph. Data sheets also list an EPA value in square feet. It describes the wind area of the panel, the light and the brackets. Have a licensed engineer check the pole, the base and the panel mount before you order.

What upkeep do solar streetlights need?

Solar lights have no power bill, but they still need care. The U.S. Department of Energy says a solar system needs an operations and maintenance plan. The plan covers routine maintenance and cleaning, and it plans for battery replacement. This planner's solar data uses a 14% system loss in PVWatts. In the PVWatts Version 5 manual, the default 14% loss includes 2% for dirt and 3% for shade. More dirt or shade than that cuts the energy, so keep the panels clean and the trees trimmed. Check the lights after a storm, because severe weather can affect solar systems.

Is solar cheaper than grid streetlights?

It depends on the length of the run and the cost to trench. Both options need poles and bases. Grid lights add a trench or bore, wire, pull boxes, a power service and a power bill. In one FDOT bid in July 2024, six bidders priced conduit by directional bore at $19 to $55 a foot. Solar adds a light kit at each pole and a battery change during its life. The cost section above compares both for your run. Some utilities also own and maintain lights for a monthly rate. For example, FPL rate schedule LT-1 covers LED lights for streets, parking lots and common areas.

How much light does a community street or trail need?

Your local code sets it. For example, Parkland Code Sec. 91-50(C) asks for a 0.5 foot-candle (fc) average and a 0.2 fc minimum on private streets in residential developments. Parkland also limits the light mounting height on those streets to 20 ft. These are maintained values, so the planner applies a light loss factor of 0.85. The FDOT Design Manual, Table 231.2.1, asks for a 1.0 fc average on other roadways and 2.5 fc on paths separate from the road. These are initial values for new lights. FDOT lowers a path to the road's level when the path lights also light the road (Sec. 231.3.5).

Our community is near the beach. Do the lights need to be turtle-safe?

They may, if they are visible from the beach. Florida's model sea turtle lighting ordinance (Rule 62B-55.004, F.A.C.) covers streetscapes, parking lots and public parks that are visible from the beach. In the model, lights for roads and parking areas must be long wavelength (560 nanometers or more), aimed down, full cutoff and fully shielded. The model allows pole lights only where lower mounting cannot meet the required light levels. Local governments adopt their own ordinances, and FWC keeps a list. In the model's guidance, nesting season in Palm Beach and Broward counties runs March 1 to October 31. In Miami-Dade, it runs May 1 to October 31.

Send to a lighting pro


        

Who checks your plan

Copy the brief and have it ready for the first call. A lighting pro checks the layout with the maker's photometric files, sizes the solar for your site, and prices the job with a licensed installer.

A Lighting Certified (LC) designer reviews South Florida projects (Palm Beach, Broward and Miami-Dade). A partner reviews projects in other areas.

How it works

1. Light

We add the light from every pole at points across the street. Each fixture throws a footprint of light on the ground. We find the widest spacing that meets the average, the minimum and the evenness of your target.

2. Night

We find the night length for each month at your place with the NOAA sunrise and sunset equations. Your dimming profile turns the night into watt-hours.

3. Sun

NREL PVWatts gives the solar energy for each month for a panel that faces south. The tilt is the latitude plus 15 degrees, which favors winter.

4. Size

The panel covers the worst month with 25% to spare. The battery covers your backup nights in the month with the longest need. We plan to use 80% of the capacity of a LiFePO4 battery and keep 20% in reserve.

Wind load: a panel on top of a pole catches wind. In Florida and other high-wind areas, a licensed engineer must check the pole, the base and the panel mount for the wind speed of the site.

Notes for the owner

These notes are for the site owner. Customers do not need them.

Status and data

  • Status. Built November 7, 2026 in the lighting-sites folder. Not deployed. No repo yet. 'Solar Streetlight Sizer' is a working name and was not checked.
  • Solar data. NREL PVWatts v8 for 11 cities (11 in Florida), fetched 2026-11-07 and 2026-11-08. NREL is now the National Laboratory of the Rockies. The old API host developer.nrel.gov no longer resolves, so we called https://developer.nlr.gov/api/pvwatts/v8.json with the public DEMO_KEY and sent only city coordinates. Settings: 1 kW DC, standard module, fixed open rack, 14% losses, south facing, tilt = whole-number latitude + 15 degrees (max 60). We use the DC monthly output per kW (Wh per panel watt per day). Dataset: NSRDB PSM V3 GOES tmy-2020 3.2.0.
  • Cities not yet in the list (29). The DEMO_KEY now allows only 10 calls in a long rolling window: after 10 calls the API answered 429 (over rate limit) for about 6 hours, gave 1 more call, then asked for a wait of about 4.8 hours. We did not find another public NREL source with monthly data that works without a key: the Solar Radiation Data Manual PDF on docs.nlr.gov has no station tables, and the old rredc pages redirect to a dead host. Run python -I tools/fetch_nrel.py again later (it waits and retries), then python -I tools/build.py. Missing: Daytona Beach, FL, Lakeland, FL, Ocala, FL, Gainesville, FL, Tallahassee, FL, Pensacola, FL, Atlanta, GA, Houston, TX, Denver, CO, Dallas, TX, Phoenix, AZ, Charlotte, NC, Nashville, TN, Austin, TX, Chicago, IL, Seattle, WA, Las Vegas, NV, San Antonio, TX, Raleigh, NC, Los Angeles, CA, New York, NY, Washington, DC, Boston, MA, Minneapolis, MN, Salt Lake City, UT, New Orleans, LA, Portland, OR, San Diego, CA, Charleston, SC.
  • Products. 16 products from 7 makers (EnGoPlanet, Greenshine New Energy, LED Lighting Supply, Leadsun USA, Sol by Sunna Design, Solar Illuminations, Solar Lighting International), each with a spec sheet URL. 5 show a public price (seen 2026-11-07). Median efficacy 180 lm/W, used to turn lumens into LED watts. Makers checked but not used: SEPCO (Stuart, FL): system pages and 2022 sales sheets give no lumens, LED watts, panel watts or battery size; every system is custom-sized. They state a minimum 5-night backup and a 15-25 ft mount range (SolarViper, SolarRatio, SolarUrban). No public prices.; First Light Technologies: firstlighttechnologies.com failed TLS (certificate is for caorda.com) and returned HTTP 403 over plain HTTP. Spec sheets appear only on a distributor site, so we did not use them.; Fonroche Lighting: North America zone pages and the Helia and Sunset brochures give marketing text only (365 nights per year; Sunset NiMH battery up to 936 Wh; >200 lm/W). No per-model lumens, LED watts or panel watts.; Signify (Philips SunStay): SunStay pages and leaflets exist on EU, Asia and Australia regional sites. The US solar URLs redirect to the US home page, so we could not confirm a US listing.; Solar Street Lights USA (Holland, MI): no public prices on the site. SPL Series lists 1,300 or 2,400 lm, a 30 W module and an AGM battery with no capacity; Horizon lists 50-100 W LED, 190/280/380 W PV and a 5-day reserve with no lumens. Not enough for one consistent configuration.; Sol EverGen (split, LiFePO4 25.6 V, 512/1,024/1,536/2,048 Wh, 200/300/400 Wp, 10-year warranty, Acuity ATBMicro fixture 2,889-8,706 lm): custom-sized per site; the leaflet gives no single panel-battery-fixture configuration and says fixture wattage depends on the solar engine size, so we did not add it as a product.; Sunna Design: covered through Sol (the Sol datasheets carry the Sunna Design copyright and the brochure reads 'Sol by Sunna Design').; Clear Blue Technologies: not checked (controller maker only, not needed for the product list).

Our assumptions

  • Our assumption: light loss factor 0.85 for maintained targets (LED lumen loss and dirt). Initial targets (FDOT) use 1.0.
  • Our assumption: 0.92 for the charge controller (MPPT) and battery charge, applied after the PVWatts DC losses.
  • Our assumption: 0.97 for battery discharge and the LED driver path.
  • Our assumption: 80% usable depth of discharge for LiFePO4, matching the maker statement 'Over 4,000 cycles at 80% DoD' (Leadsun USA catalog). We also use 80% for NiMH and lithium of an unstated type.
  • Our assumption: 50% usable depth of discharge for GEL or AGM lead-acid.
  • Our assumption: the panel gives 25% more than the need in the worst month, so the battery can refill after a cloudy run.
  • Our assumption: a month passes when the panel gives at least 120% of the need in that month; 100% to 119% is tight; under 100% fails.
  • Our assumption: a heavily cloudy day gives 10% of the month's average solar energy.
  • Our assumption: above 400 W of panel, one pole is not practical.
  • Our assumption: common lumen sizes. LED watts = lumens / the median efficacy of the product catalog. Median: 180 lm/W.
  • Our assumption: battery size = the night need in the month with the most need x backup nights / depth of discharge, in 12.8 V packs of 5 Ah steps.
  • Our assumption: grid lights use the same lumens, watts and dimming profile. Grid power price = EIA commercial average for the state (August 2026).
  • Our assumption: light footprint of each optic type (in mounting heights): Type II 1.9 along, 1.25 in front, 0.6 behind; Type III 1.9, 1.7, 0.6; Type V 1.5 all around. Poles 3 ft behind the street edge (2 ft for paths). One side up to a width of 1.5 x pole height, staggered when wider; parking uses one center row.
  • Our assumption: night = sunset to sunrise on the average day of each month; the photocell switch time is not modeled.
  • Cost, pole base install: Town of Longboat Key records (reported May 8, 2018): $8,065 a pole with a modern flat fixture and $10,050 with a decorative lamp. We subtract the installed LED head price from FDOT bid T4703 ($900 to $1,600) to get the pole, base and labor part: $8,065 - $1,600 = $6,465 and $10,050 - $900 = $9,150. No change for cost growth since 2018. The article does not say if wiring is in the per-pole figure.
  • Cost, kit per panel w: Five public kit prices seen November 7, 2026: Solar Illuminations SL28 (50 W panel) $699.99, about $14 a watt; SL40 (64 W) $1,199.99, about $18.75; SL10 split system from $1,899.99 (45 to 180 W panel), about $10.60 a watt at 180 W; LED Lighting Supply LLS-AG-SOL2-40-40 (45 W) $684.04, about $15.20; MLLG-AG-LED-SLH-40-40-T3 (63 W) $1,035.34, about $16.40. The two LED Lighting Supply prices need an order of 10 or more.
  • Cost, wire runs: Our assumption: two conductors along the run (the ground wire is in the conductor price).
  • Cost, ft per service: Our assumption: one power service for each 2,000 ft of run, for voltage drop.

To confirm before launch (LC review)

  • Light targets per use: residential street 0.5 fc average, 0.2 fc minimum (Parkland code, maintained); path 2.5 fc (FDOT, initial) or street level; parking 1.0 fc minimum (Parkland) or 1.5 fc average (FDOT rest area); entry 1.0 fc (FDOT unsignalized intersection). Is IES RP-8 or a county code a better default for CDD streets?
  • The light footprint model and the spacing it gives (for example about 115 ft for 20 ft poles on a 24 ft street at the local-code level, about 5.7 pole heights). Compare with an AGi32 run of one real product.
  • 80% usable depth of discharge for LiFePO4, the 25% panel margin, the 10% cloudy-day sun, and the pass, tight and fail limits.
  • Cost ranges: pole, base and labor $6,465 to $9,150 a location (from 2018 Longboat Key figures); trench or bore $19 to $55 a foot (FDOT bore bids; open trench in new construction can be lower); kit price $11 to $19 a panel watt.
  • Battery change interval and price (not priced on the page).
  • Cold climates: LiFePO4 must not charge below freezing without a heater. The page does not model battery temperature.

Engine limits

  • Generic light footprint, not IES files. Light stats are for one repeating cell of a long, even run; the first and last poles get less light. No curves, trees or shadows.
  • The light check uses full output. Dimmed hours give less light in proportion (the page says how much).
  • Solar uses typical-year monthly averages (TMY). A real run of bad weather can be longer than the backup nights. No snow, shade, soiling events or panel aging beyond the PVWatts losses.
  • Night length uses one average day per month. PVWatts tilt is latitude + 15 degrees; a product with a flat or fixed panel gets less in winter.
  • Products are checked at their rated LED watts with the user's profile. Makers often ship a dimmer default profile, so their own claims can be higher.
  • Costs are first costs only. No permits, survey, engineering, utility fees, taxes or yearly upkeep. Battery replacement is not priced.

Wind loads

Florida wind loads need an engineer. A panel on top of a pole adds wind load. In Florida, a licensed engineer must check the pole, the base and the panel mount for the design wind speed of the site (Florida Building Code and ASCE 7) before an order. The page says this to the customer in plain words, and the brief flags it.

Routing

Routing plan. No form and no backend. The customer copies a plain-text brief. The page shows one routing line: an LC designer reviews South Florida projects (Palm Beach, Broward and Miami-Dade); a partner reviews other areas. The page marks Miami, Fort Lauderdale and West Palm Beach as South Florida. No partners are signed yet. No email, phone or name is on the page.

Sources (43)

Ask a lighting designer about this project

Send your plan to Holzer Lighting in Boca Raton, Florida. Holzer Lighting designs, specifies and buys lighting for owners, managers, designers and builders.

A designer reads your brief and contacts you. The designer checks the rules, the light levels and the prices for your site. This page gives planning estimates only.

You can also email info@holzerlighting.com or call 561.508.8990.

About Holzer Lighting

Other free lighting tools:

Holzer Lighting gets your details and the project brief from this page. They use them only to answer you.